Ranger 4WD L4-2.3L VIN D (2002)
14. Connect the TCC, SSD, SSB, and EPC solenoid electrical connectors.
15. CAUTION: Excessive pressure may break the retaining pins.
Install the wire loom guide and protector.
-
Align the retaining pins to the holes in the solenoid clamps and gently press in the wire loom guide and protector.
16. Install the transmission fluid pan.
1. Install a new transmission fluid pan gasket on the transmission fluid pan.
2. Install and align the transmission fluid pan.
^Loosely install the transmission fluid pan screws
17. Tighten the transmission fluid pan screws.
-
Tighten the transmission fluid pan screws in a crisscross sequence.