Ranger 4WD L4-2.3L VIN D (2002)
6. Remove the manual control outer lever nut and manual control outer lever.
7. Loosen the screws on the digital TR sensor.
8. NOTE: If equipped, the transmission servo heat shield needs to be unclipped from the fluid pan rail and positioned out of the way for fluid pan
removal.
If equipped, loosen the nut and position the heat shield out of the way.
9. Drain transmission fluid.
Remove all the transmission fluid pan bolts except for two in the front. Loosen the two front transmission fluid pan screws. Pry the rear of the
transmission fluid pan down and allow fluid to drain. After fluid is drained remove the front two transmission fluid pan screws.