Ranger 4WD L4-2.3L VIN D (2002)
3. Disconnect the electronic pressure control (EPC) solenoid electrical connector.
14. Remove the manual control valve detent lever spring.
1. Remove the manual control valve detent lever spring screw.
2. Remove the manual control valve detent lever spring.
15. Remove the low/reverse servo.
1. Remove the low/reverse servo cover screws.
2. Remove the low/reverse band servo cover and gasket. Discard the low/reverse servo separator plate cover gasket.
16. Remove the low/reverse band servo piston and rod.
17. CAUTION: Support the main control valve body.
Do not remove the two (gold) screws specified.