Ranger 4WD L4-2.3L VIN D (2002)
16. Install the transmission fluid filter.
1. Install the transmission fluid filter.
2. Install the transmission fluid filter screw.
17. Install the transmission fluid pan.
1. Position a new transmission fluid pan gasket on the transmission fluid pan.
2. Install and align the transmission fluid pan.
18. Tighten the transmission fluid pan screws.
-
Tighten the transmission fluid pan screws in a crisscross sequence.
19. CAUTION: Tightening one screw before tightening the other may cause the sensor to bind or become damaged.
NOTE: The manual lever must be in the NEUTRAL position.
Using the special tool, align the digital TR sensor and tighten screws in an alternating sequence.