Ranger 4WD L4-2.3L VIN D (2002)
Clutch Disc: Service and Repair
Disc and Pressure Plate
Special Tool(s)
Removal
1. Remove the transmission.
2. CAUTION: If the clutch disc and pressure plate are to be reinstalled, bolts must be removed evenly or permanent damage to the diaphragm
spring will occur resulting in complete clutch release.
Remove the bolts, clutch pressure plate and the clutch disc.
-
If the parts are to be reused, index-mark the clutch pressure plate to the flywheel.
Installation
1. Lubricate the transmission input shaft pilot bearing.
-
Use front axle grease.