Ranger 4WD L4-2.3L VIN D (2002)
8. NOTE: If a new bolt is unavailable, coat the threads with threadlock prior to installation.
Install a new bolt finger-tight.
9. Using the special tool, install the new differential bearings.
10. CAUTION: If installing a new anti-lock speed sensor ring, align the notch on the case flange and the tab on the anti-lock speed sensor ring.
Position the differential ring gear, the anti-lock speed sensor ring, and the differential case. Align the bolt holes by starting two bolts through the
holes in the differential case and the differential ring gear. Press the new anti-lock speed sensor ring, if removed, and the differential ring gear on
the differential case.
11. Install the bolts.
-
Apply stud and bearing mount to the bolt threads.
12. Install the differential assembly.
Differential Case and Ring Gear-Traction-LOK
Differential Case and Ring Gear-Traction-Lok
