Ranger 4WD L4-2.3L VIN D (2002)
![background image](/ford/ranger_4wd/l4-2.3l_vin_d/Page-1779002.png)
Driveshaft-Front
NOTE: Whenever the vehicle is raised on a hoist, inspect the universal joint slip yoke boot for rips or holes. Install new if required.
NOTE: All driveshafts are balanced. If undercoating the vehicle, protect the driveshaft and universal joints to prevent application of any undercoating
material.
NOTE: The constant velocity (CV) joint on the front driveshaft is not serviceable.The front driveshaft is connected to the transfer case and the front
drive axle by a driveshaft flange yoke.