Ranger 4WD L4-2.3L VIN D (2002)
3. CAUTION: Index-mark the rear output shaft and the flange.
CAUTION: The nut has a self-locking feature. Discard the nut and the washer after removing them.
Use the special tool to prevent the flange from turning. Remove and discard the nut and the washer.
4. Using a suitable puller, remove the flange.
5. Remove the oil seal if it remains on the rear output shaft.
6. Using the special tool, remove the oil seal.
Installation
1. Clean the seal mounting surface.
