Ranger 4WD V6-177 2.9L (1988)
Outer Pad Installation
4. Install the outer pad, making sure the torque buttons on the pad are seated solidly in the matching holes in the caliper.
5. Install the caliper on the spindle, making sure the mounting surfaces are free of dirt and lubricate the caliper grooves with disc brake caliper
grease.
Caliper Pin Installation
6. Position pin with the pin retention tabs oriented adjacent to the spindle groove.
NOTE: Do not use the bolt and nut with the new pin.
7. Tap the pin on the outboard end with a hammer. Continue tapping the pin inward until the retention tabs on the sides of the pin contact the spindle
face. Repeat procedure for the lower pin.
