Ranger 4WD V6-177 2.9L (1988)
b.
Apply RTV (or equivalent) to the T-Joints of the cylinder head/intake manifold, Figure 2.
3.
Install the rocker arm covers with new gaskets, Figure 1.
4.
Apply an 8 mm ball of RTV (or equivalent) to the bolt holes of the exhaust side of the rocker cover (4 holes each side).
5.
Install patch pieces, together with conical spring washer screws (W-700 099 S309M), Figure 2.
NOTE:
IF PRESENT, REUSE THE EXISTING CONICAL SPRING WASHER SCREWS. ONLY ORDER NEW SCREWS IF THEY ARE NOT PRESENT
OR THE EXISTING ONES ARE LOST, STRIPPED, OR DAMAGED.
6.
Tighten the screws to 4.5 - 5.9 lb.ft. (6-8 N-m).
7.
Start engine and check for leaks.
PART NUMBER
PART NAME
CLASS
F1TZ-6584-A
Rocker Cover Gasket (2.9L)
B
W-700099-S309M
Conical Spring Washer Screws
C
D6AZ-19562-BA
Silicone Rubber Adhesive
B
OTHER APPLICABLE ARTICLES:NONE
SUPERSEDES: 92-14-14
WARRANTY STATUS:
Eligible Under Basic Warranty Coverage, Powertrain Warranty Coverage And Bumper To Bumper For 1992 Model Vehicles.
OPERATION
DESCRIPTION
TIME
930612A
Replace Rocker Cover
0.8 Hr
Gasket (R.H.)
930612B
Replace Rocker Cover
0.9 Hr
Gasket (L.H.)
930612C
Replace Rocker Cover
1.6 Hr
Gaskets (Both)
DEALER CODING
BASIC PART NO.
CONDITION CODE