Ranger 4WD V6-177 2.9L (1988)
Clutch: Service and Repair
Reverse Clutch
DISASSEMBLE
Exploded View Of Reverse High Clutch
1. Remove pressure plate retainer ring, then the plate pack.
2. Inspect steel clutch plates and clutch lining plates for wear, damage, or effects of overheating, replacing entire set if necessary.
NOTE: If new plates are to be used, immerse them in transmission fluid for 30 minutes before assembly.
Removing Or Installing Reverse High Clutch Spring And Compression Spring Retainer
3. Using clutch spring compressor T65L-77515-A or equivalent, compress clutch compression springs, remove retaining ring, and carefully release
pressure on spring, then remove spring and compression spring retainer.