Ranger 4WD V6-177 2.9L (1988)
2.
Verify the pushrod. (Refer to Exhibit I)
A correct pushrod has a square shoulder as indicated.
An incorrect pushrod has a tapered shoulder.
3.
Replace the hydraulic clutch control assembly master cylinder with new master cylinder (Part Number E8TZ-7A543-A).
Parts Information
Parts required for this program may be ordered through normal channels.
RETURN OF PARTS
All removed master cylinder assemblies must be returned to the company/address shown below:
Automotive Products Inc.
6515 Cobb Drive
Sterling Heights, MI 48077
Attention: Mr. Steve Godra
Return the assemblies in the carton in which the new assembly is received.
Enclose a copy of the claim form 1863
Prepay the freight and claim on the form 1863
Labor Information
LABOR OPERATIONS
CLAIM PREPARATION INSTRUCTIONS (A copy of these instructions should be filed in Subject 5.3 or 9.0 of your Warranty and Policy Manual).
Repairs performed under Owner Notification Program B83 are to be submitted on warranty claim Forms 1863, which are to include the information
shown below. Enter Program Number B83 in the Program Code box in the upper left of the form. Repair claims should be submitted through the Direct
Warranty Entry (DWE) System.
Causal Basic Part Number
- 7AS43
Condition Code
- 38
Labor Operations
- See Labor Operations
Scheduled Time
- See Labor Operations
Program Code
- B83
Include the prepaid freight charges on the form 1863 for returning the removed master cylinder assemblies to Automotive Products, Inc.
NOTIFICATION
Owners of affected trucks will be advised of Owner Notification Program B83 by letter.