ford Workshop Repair Guides

Ford Workshop Service and Repair Manuals

All Technical Service Bulletins for Shifter M/T: > < M/T - M50D Hard Shift Condition|Page 4093
Page 1
background image

Shifter M/T: Customer Interest
M/T Shift Lever - Buzzing Noise

Article No. 88-19-6

^

TRANSMISSION - MITSUBISHI FIVE SPEED - SHIFT LEVER "BUZZ" IN THIRD, FOURTH OR FIFTH GEAR

^

NOISE - SHIFT LEVER "BUZZ" IN THIRD, FOURTH OR FIFTH GEAR - MITSUBISHI FIVE SPEED

LIGHT TRUCK:

1988 RANGER, BRONCO II

ISSUE:

A "buzzing "noise heard inside the passenger compartment while driving in third, fourth or fifth gear may be caused by the gear shift lever.
The gear shift lever damping material may be inadequate to prevent the "buzzing" noise.

ACTION:

Install a new design gear shift lever that has improved damping material. Refer to the 1988 Ranger/Bronco 11 Shop Manual, Section
16-18-6 for removal and installation procedures.

NOTE:

INSTALL A NEW SHIFT LEVER BALL ASSEMBLY IF REQUIRED. 

PART NUMBER            PART NAME        

CLASS

E8TZ-7210-P

Lever-Transmission Shifter

C

E8TZ-7213-B

Ball-Shift Lever

B

OTHER APPLICABLE ARTICLES: None
WARRANTY STATUS: Eligible Under Basic And Powertrain Warranty Coverage
OPERATION: 881906A
TIME:

0.3 Hr. 

DLR. CODING:

Basic Part No. 7K387
Condition Code:  56

All Technical Service Bulletins for Shifter M/T: > < M/T - M50D Hard Shift Condition|Page 4093