Ranger 4WD V6-177 2.9L (1988)
13.
Remove the clamp from the window if used.
14.
Cycle the window up and down. If the noise is gone, proceed to Step 22. If the noise is still present, proceed to Step 15.
15.
Clamp the door glass in the full up position.
16.
Remove the three (3) nut and washer assemblies that hold the door glass guide to the door inner panel.
17.
Slide the guide out from the door glass bracket and throw it away.
18.
Position the new guide, (E9TZ-1021546-A) to the door glass bracket.
19.
Reinstall the three (3) nut and washer assemblies that hold the door glass guide to the door inner panel.
20.
Apply a liberal amount of Ford Multi-Purpose Grease, (DOAZ-19584-AA) to the channel.
21.
Remove the clamp from the door glass.
22.
Install the watershield and trim panel.
23.
Repeat Steps 1 through 22 on the opposite side of the vehicle.
PART NUMBER
PART NAME
CLASS
E9TZ-1023240-A
Slide - Regulator Arm - pkg. of
B
2
E9TZ-10234B36-A
Slide - Glass Bracket - pkg. of
B
4
E9TZ-1021546-A
Guide - Glass Bracket - pkg. of 1
B
385323-S100
Blind Rivet - pkg. of 10
BR
385189-S100
Rivet - pkg. of 8
BS
DOAZ-19584-AA
Ford Multi-Purpose Grease -
B
pkg. of 4
OTHER APPLICABLE ARTICLES:
None
WARRANTY STATUS:
Eligible Under Basic Warranty Coverage
OPERATION
DESCRIPTION
TIME
890811A
Replace Slides & Lube
2.9 Hrs.
Guides
890811B
Replace Slides & Guides
3.1 Hrs.
DEALER CODING
BASIC PART NO. CONDITION CODE
7023240
41
OASIS CODES:
1300