Ranger 4WD V6-245 4.0L (1991)
Clutch Disc: Service and Repair
REMOVAL
1. Disconnect clutch hydraulic system master cylinder from clutch pedal and dash panel.
2. Raise and support vehicle.
3. Remove starter motor from engine.
4. Remove hydraulic hose to slave cylinder retaining clip, then disconnect hose from save cylinder. Clean area around hose and slave cylinder to
prevent fluid contamination.
5. Disconnect the hydraulic coupling at transmission with coupling disconnect tool No. T88T-70522-A or equivalent by sliding the white plastic
sleeve toward slave cylinder and applying a slight tug on tube.