Ranger 4WD V6-245 4.0L VIN X SFI (1999)
![background image](/ford/ranger_4wd/v6-245_4.0l_vin_x_sfi/Page-2003001.png)
Vacuum Reservoir HVAC: Service and Repair
REMOVAL
1. If the A/C vacuum reservoir tank and bracket is visible from above in the engine compartment, perform Steps 2 through 4. If the A/C vacuum
reservoir tank and bracket is not visible in the engine compartment, perform Steps 5 through 8.
NOTE: The A/C vacuum reservoir tank and bracket is located either on or beneath the RH front fender splash shield.
2. Remove the screws and the A/C vacuum reservoir tank and bracket.
3. Disconnect the vacuum supply and outlet hoses.
4. Disconnect the vacuum hose from the back of the tank if equipped with 4-wheel drive.
5. Remove the engine air cleaner.
6. Remove the RH front fender splash shield.
7. Remove the nuts and remove the A/C vacuum reservoir tank and bracket.