Ranger 4WD V6-245 4.0L VIN X SFI (1999)
Safety Belt Bolt Bit
Special Tool(s)
REMOVAL
1. Remove the rear door trim panel.
2. Remove the front safety belt retractor and tongue.
1
Use Safety Belt Bolt Bit to remove the bolt.
2
Remove the front safety belt retractor and tongue.
INSTALLATION
1. To install, reverse the removal procedure.
-
Use the special tool to install the bolts.
-
Check the restraint system for normal operation.
Rear Seat - Four-Door SuperCab
Safety Belt Bolt Bit