Ranger 4WD V6-245 4.0L VIN X SFI (1999)
7. CAUTION: The TCC solenoid and converter modulator valve may pop out of its bore. This may damage the solenoid or converter
modulator valve.
CAUTION: Shift solenoid (SSC) may pop out of its bore. This may damage the solenoid.
Remove the shift solenoids.
1
Remove the wire harness.
2
Remove the solenoid clamp screws.
3
Remove the solenoid clamp.
4
Remove the appropriate solenoid(s).
Installation
1. Install the new solenoid(s).
2. CAUTION: The solenoid clamp must be installed in the TCC and EPC solenoid grooves, shift solenoid pockets and the No. 204 plug.
Install the solenoid clamp.
1
Position the solenoid clamp on the main control valve body.
2
Install the solenoid clamp screws.