Ranger 4WD V6-245 4.0L VIN X SFI (1999)
28. Remove the differential case from the axle housing.
29. Remove the ring gear.
1
Remove the eight ring gear bolts.
2
Use a drift punch to separate the ring gear from the differential case.
30. NOTE: Use of proper shims is necessary for this step.
Install the differential case in the axle housing without the ring gear.
1
Position the differential case.
2
Position the differential bearing caps.
3
Install the four bolts.
31. Install and position the dial indicator with bracketry.
1
Rotate the differential case to ensure the differential bearings are properly seated.
2
Install and position the dial indicator with bracketry.