Ranger 4WD V6-3.0L (2008)
PROM - Programmable Read Only Memory: All Technical Service Bulletins
Engine, A/T Controls - Delayed A/T Engagement
TSB 08-5-2
03/17/08
DELAYED AUTOMATIC TRANSMISSION
ENGAGEMENT - BUILT ON OR BEFORE 02/14/2008
FORD:
2007-2008 Ranger
This article supersedes TSB 08-2-5 to add a production fix date.
ISSUE
Some 2007-2008 Ranger vehicles equipped with an automatic transmission and built on or before 02/14/2008 may exhibit a delayed shift engagement
into drive or reverse.
ACTION
Reprogram the powertrain control module (PCM) to the latest calibration using IDS release 52.11 and higher or 53.1 and higher. This new calibration is
not included in the VCM 2007.11 DVD. Calibration files may also be obtained at the website.
NOTE
TO MAXIMIZE THE BENEFIT OF THIS CALIBRATION, PCM KEEP ALIVE MEMORY (KAM) MUST BE RESET.
NOTE
AUTHORIZATION DECAL NOT REQUIRED.
WARRANTY STATUS: Eligible Under Provisions Of New Vehicle Limited Warranty Coverage
IMPORTANT: Warranty coverage limits/policies are not altered by a TSB. Warranty coverage limits are determined by the identified causal part.
OPERATION
DESCRIPTION
TIME
080502A
2007-2008 Ranger With
0.7Hr.
Automatic Transmission:
Check DTCs And
Reprogram The PCM,
Includes Time To Clear
KAM and, Road Test
Authorization Decal Not
Required (Do Not Use
With 12650D)
DEALER CODING
CONDITION
BASIC PART NO.
CODE
RECAL
04
Disclaimer