Ranger 4WD V6-3.0L (2008)
To deplete the backup power supply energy, disconnect the battery ground cable and wait at least 1 minute. Be sure to disconnect
auxiliary batteries and power supplies (if equipped).
Failure to follow these instructions may result in serious personal injury or death in the event of an accidental deployment.
Disconnect the battery ground cable and wait at least 1 minute.
7. Remove the 2 driver air bag module bolts (1 shown).
8. CAUTION: Do not pull the driver air bag module electrical connectors out by the locking buttons. Damage to the locking buttons may
occur.
Using a small screwdriver as shown, lift up and release the locking buttons on the driver air bag module electrical connectors. With the locking
buttons released, remove the electrical connectors and the driver air bag module.
9. Attach the restraint system diagnostic tools to the clockspring electrical connectors at the top of the steering column.
