Ranger 4WD V6-3.0L (2008)
7. Install the right side bearing cap and tighten the 2 left side and 2 right side bolts.
^
Tighten to 112 Nm (83 lb-ft).
8. Rotate the differential case to make sure it rotates freely.
Measuring backlash
9. Using the special tools, measure the ring gear backlash.
^
If the backlash is within specification, go to Backlash within specification.
^
If a zero backlash condition occurs, go to Zero backlash in this procedure.
^
If the backlash is not within specification, go to Backlash not within specification.
