Ranger 4WD V6-3.0L VIN U (1997)
6. Connect to seat wiring harness.
7. Install front seat cushion side shield to front seat cushion frame and spring using screws and fastener tab on cushion frame and side shield.
8. Position the front seat and front seat track in vehicle.
9. Connect wire harness.
10. Install the seat track-to-floorpan front attaching bolts, then rear attaching bolts. Tighten the bolts to 19-26 Nm (14-19 Lb-Ft).
11. Install front seat cushion side shield.
12. Install boot to slide bar and secure slide bar to floorpan with bolt previously removed. Tighten to specification.
13. Install plug to slide bar boot.
14. Check front seat tracks for proper operation.