Ranger 4WD V6-3.0L VIN U (1997)
3. Clean and inspect the overdrive one-way clutch and overdrive center shaft assembly. Check for cracks in the roller cage and wear on the roller
clutch. Inspect the press fit of the one-way roller clutch to the overdrive center shaft.
Inspect the rollers and springs for excessive wear or damage.
Inspect the spring and roller cage for bent or damaged spring retainers.
CAUTION: Do not remove the overdrive one-way clutch. Damage to the clutch may occur if it is removed.
NOTE: The overdrive one-way clutch is serviced with the overdrive center shaft.
4. Temporarily insert the overdrive planetary gear carrier assembly into the one-way clutch rollers for verification of the one-way clutch. The
planetary must rotate counterclockwise and hold clockwise as shown. Remove the overdrive planetary gear carrier assembly.
ASSEMBLY
1. Install the overdrive center shaft and overdrive one-way clutch into the overdrive ring gear.