Ranger 4WD V6-3.0L VIN V Flex Fuel (1999)
General Module: Service and Repair
Wiring Repair Procedures
Heat Gun
Special Tool(s)
1. Disconnect the battery ground cable.
2. Strip the wires.
3. Solder the wires.
1
Install the heat shrink tube.
2
Twist the wires together.
3
Solder the wires together.
NOTE: Use Rosin Core Mildly Activated (RMA) solder, not acid core solder.
4. Bend the wires back in a straight line.