Ranger 4WD V6-3.0L VIN V Flex Fuel (1999)
Hood Latch Release: Service and Repair
REMOVAL
NOTE: The hood latch control handle and cable are replaced as an assembly.
1. Remove the hood latch.
2. Unclip the hood latch control handle and cable from the inner fender retainer.
3. Unclip the hood latch control handle and cable retainer from the inner fender splash shield.
4. Position the hood latch control handle and cable aside.
1. Remove the two screws.
2. Position the hood latch control handle and cable aside.