Ranger 4WD V6-3.0L VIN V Flex Fuel (1999)
1. Install the speed control servo bracket bolt.
2. Lock the cable ball slug into the slot located in the servo rotor.
3. Pull the cable taut at the throttle body end.
NOTE: Be sure the white indicator mark is visible on the speed control actuator cable for proper routing.
4. Align and insert the cap into the slots in the servo body.
5. Rotate the cap clockwise until the locking arm on the cap engages the tab on the servo.
6. Install the battery ground cable.
NOTE: When the battery is disconnected and reconnected, some abnormal drive symptoms may occur while the vehicle relearns its adaptive
