Ranger 4WD V6-3.0L VIN V Flex Fuel (1999)
Valve Cover: Service and Repair
Right Side
Removal
1. Disconnect the battery ground cable
2. Disconnect the engine control sensor wiring from the ignition coil.
3. Disconnect the spark plug wires from the RH spark plugs and position the wires aside.
4. Disconnect the engine control sensor wiring from the Intake Air Temperature (IAT) sensor.
5. Disconnect the engine control sensor wiring from the Mass Air Flow (MAP) sensor. Position the engine control sensor wiring aside.
6. Disconnect the vacuum line.
