Ranger 4WD V6-3.0L VIN V Flex Fuel (1999)
Engine Mount: Service and Repair
RH
Removal
1. Disconnect the battery ground cable.
2. Remove the hood.
3. Remove the fan blade.
4. Attach the Engine Lifting Eyes.
5. Remove the nuts.
6. Raise the engine and support with a Three-Bar Engine Support Kit.
7. Raise the vehicle on a hoist.
8. Remove the right front spring.
9. Remove the nut.
10. Remove the motor mount.
Installation
1. Position the motor mount.
2. Install the nut.
3. Install the right front spring.
4. Lower the vehicle.
5. Using a suitable floor crane, raise the engine and remove the Three-Bar Engine Support Kit.