Ranger 4WD V6-3.0L VIN V Flex Fuel (1999)
2. Install the intake manifold gaskets and seals.
1
Apply a drop of Silicone Gasket and Sealant at the four cylinder block-to-cylinder head seams.
-
Use Silicone Gasket and Sealant F6AZ-19562-AA or equivalent meeting Ford specification WSE-M4-G323-A6.
2
Position the intake manifold gaskets.
3
Position the intake manifold front and rear seals.
3. Position the lower intake manifold.
4. Install the bolts and tighten in the sequence shown.
5. Install the push rods
6. Install the rocker arms.