Ranger 4WD V6-3.0L VIN V Flex Fuel (1999)
Control Assembly: Service and Repair
Climate Control Switches
REMOVAL
1. Remove the climate control assembly.
2. Remove the heater blower motor switch.
1. Remove the screw.
2. Rotate and remove the heater blower motor switch.
NOTE: The knob will come off when the switch is removed.
3. Remove the temperature control switch and the A/C damper door switch.
1. Remove the screw.
2. Rotate and remove the temperature control switch.
3. Rotate and remove the A/C damper door switch.
NOTE: The knobs will come off when the switch is removed.
INSTALLATION
1. Follow the removal procedure in reverse order.