Ranger 4WD V6-3.0L VIN V Flex Fuel (1999)
Throttle Body: Service and Repair
REMOVAL
1. Disconnect the battery ground cable.
2. Remove the throttle return spring.
3. Disconnect the engine control sensor wiring from the Idle Air Control (IAC) valve and the Throttle Position (TP) sensor.
4. Disconnect the accelerator cable and speed control actuator cable.
5. Remove the throttle body.
6. If required, remove the Throttle Body (TB) gasket.
7. If required, remove the idle air control valve and Idle Air Control (IAC) gasket.
