Ranger 4WD V6-3.0L VIN V Flex Fuel (1999)
-
Repair is made by installing a new part only. If the new part does not correct the condition, install the original part and perform the diagnostic
procedure again.
1. Disconnect the battery ground cable and wait at least one minute.
2. Open the glove compartment door to access the passenger air bag retaining screws.
3. Remove the two passenger air bag retaining screws.
4. Placing one hand in the glove compartment, push the passenger air bag out enough to access the electrical connector.
CAUTION: Do not handle the passenger air bag module by grabbing the edges of the deployment doors.
5. Disconnect the electrical connector and remove the passenger air bag.
INSTALLATION