Ranger 4WD V6-3.0L VIN V Flex Fuel (1999)
4. Placing one hand in the glove compartment, push the passenger air bag out enough to access the electrical connector.
CAUTION: Do not handle the passenger air bag module by grabbing the edges of the deployment doors.
5. Disconnect the electrical connector and remove the passenger air bag.
INSTALLATION
1. Follow the removal procedure in reverse order.
WARNING:
-
If replacing a deployed air bag module, always install a new air bag Restraints Control Module (RCM).
NOTE:
-
Repair is made by installing a new part only. If the new part does not correct the condition, install the original part and perform the diagnostic
procedure again.
