Ranger 4WD V6-3.0L VIN V Flex Fuel (1999)
Air Bag Control Module: Service Precautions
WARNING:
-
To avoid accidental deployment and possible personal injury, the backup power supply must be depleted before repairing or replacing
any front or side air bag Supplemental Restraint System (SRS) components and before servicing, replacing, adjusting or striking
components near the front or side air bag sensors, such as doors, instrument panel, console, door latches, strikers, seats and hood latches.
-
To deplete the backup power supply energy, disconnect the battery ground cable and wait at least one minute. Be sure to disconnect
auxiliary batteries and power supplies (if equipped). The Restraints Control Module (RCM) orientation is critical for correct system
operation. If a vehicle equipped with an air bag supplemental restraint system (SRS) has been involved in a collision in which the center
tunnel area has been damaged, inspect the mounting and bracket for deformation. If damaged, the RCM must be replaced whether or not
the air bags have deployed. In addition, make sure the area of the RCM mounting is restored to its original condition.