Ranger 4WD V6-3.0L VIN V Flex Fuel (1999)
14. Connect the six solenoid electrical connectors.
1
Connect SSA, SSB, SSC, and SSD electrical connectors.
2
Connect the Torque Converter Clutch (TCC) solenoid electrical connector.
3
Connect the Electronic Pressure Control (EPC) solenoid electrical connector.
15. CAUTION: Excessive pressure may break the locating pins.
Install the main control valve body wire harness. Align the retaining pins to the holes in the solenoid clamps and press in the main control valve
body wire harness guide and protector.
16. Install the transmission fluid filter.
1
Install the transmission fluid filter.
2
Install the transmission fluid filter screw.
17. Install the transmission fluid pan.
1
Position a new transmission fluid pan gasket on the transmission fluid pan.
2
Install and align the transmission fluid pan.
