Ranger 4WD V6-3.0L VIN V Flex Fuel (1999)
5. Release the vacuum and remove the special tool.
6. CAUTION: Do not overfill the reservoir.
Check the fluid level. If necessary, fill the reservoir to the proper level.
-
Use Motorcraft MERCON (R) Multi-Purpose ATF XT-2-QDX or MERCON (R) equivalent.
7. Reinstall the special tool. Apply and maintain maximum vacuum.
8. CAUTION: Do not hold the steering wheel against the stops for more than three to five seconds at a time. Damage to the power steering
pump will occur.
Cycle the steering wheel fully to the left and right every 30 seconds for approximately five minutes.
9. Stop the engine, release the vacuum, and remove the special tool.
10. Install the reservoir cap.
11. Check for fluid leaks at all of the connections. If the power steering fluid shows signs of air, repeat this procedure.