Ranger 4WD V6-3.0L VIN V Flex Fuel (1999)
5. CAUTION: The torsion bar adjustment bolt is coated with dry adhesive, and must The installed new if it is backed off or removed.,
Failure to do so can cause the adjustment bolt to loosen up during operation and a loss of vehicle alignment.
Remove the torsion bar adjustment bolt and the nut.
6. Loosen the torsion bar adjustment tool until all of the tension is off from the torsion bar.
7. Remove the torsion bar.
1
Mark the torsion bar and the adjuster for correct installation.
2
Remove the torsion bar insulator.
3
Grasp the torsion bar and pull it free from the front suspension lower arm.
Installation
1. Position the torsion bar into the front suspension lower arm.
