Ranger 4WD V6-3.0L VIN V Flex Fuel (1999)
9. NOTE: The springs and valves are not inter changeable.
Install the extension housing lube orifice and the metal silver Electronic Pressure Control (EPC) limit relief valve and spring.
1
Install the extension housing lube orifice.
2
Install the silver metal EPC limit relief valve and spring.
10. NOTE: Apply petroleum jelly on the valve body separator plate to hold the main control to separator plate gasket in place.
NOTE: Use new separator plate main control to separator plate gasket on installation.
Install the main control valve body separator plate and gasket to the main control.
1
Position the main control valve body separator plate to the main control gasket and install separator plate to main control valve body.
2
Install, do not tighten, the (3) screws.
11. Install the Guide Pins into the main control valve body.
1
Install large guide pin (.248).
2
Install small guide pin (.235).