Ranger 4WD V6-3.0L VIN V Flex Fuel (1999)
8. CAUTION: Servo cover is under spring pressure.
Using Servo Cover Compressor, remove the overdrive band servo cover retaining ring.
1
Install the Servo Cover Compressor and compress the overdrive band servo cover.
2
Remove the overdrive servo cover retaining ring.
3
Slowly remove tension on the J-hook nut and remove the servo cover compressor.
9. CAUTION: Servo removal tool should be used to prevent damage to the servo, servo cover and bore.
Use Servo Removal Tool to remove the overdrive band servo cover, servo piston and servo piston spring.
^
Insert Servo Removal Tool into the transmission case, locate on servo rod, and remove overdrive band servo cover, servo piston and servo
piston spring.
Installation
1. Assemble the overdrive band servo cover, overdrive band servo piston, and the servo piston spring.
1
Install the overdrive band servo piston into the overdrive band servo cover.
2
Install the servo piston spring on the overdrive band servo piston.