Ranger 4WD V6-3.0L VIN V Flex Fuel (1999)
Selector Shaft: Service and Repair
Removal
1. Disconnect the battery ground cable.
2. Raise and support the vehicle.
3. NOTE: It is not necessary to remove the transmission fluid filter to perform this procedure.
Remove the transmission fluid pan.
4. Remove the digital Transmission Range (TR) sensor.
5. Remove the manual control valve detent lever spring.
1
Remove the screw.
2
Remove the manual control valve detent lever spring.
6. CAUTION: Do not damage the valve inner lever pin.
Remove the nut.