Ranger 4WD V6-3.0L VIN V Flex Fuel (1999)
1. CAUTION: 118 ml (4 oz) of the specified Ford Friction Modifier must be used in the axle.
NOTE: Differential Clutch Pack Rebuild Kit F5ZZ-4947-BA is available for rebuild of the 7.5 inch ring gear, Traction-Lok.
Prelubricate each steel clutch plate and soak all friction plates with additive Ford Friction Modifier C8AZ-1913546-A or equivalent meeting Ford
specification EST-M2C118-A for at least 15 minutes.
2. CAUTION: Do not mix the differential clutch packs or shims from one side with the other.
Assemble the differential clutch packs (without the shims) on the respective differential side gears.
3. CAUTION: Make sure the correct mandrel is used with the special tool.
Place the base portion of the special tool in a vise. Install the differential clutch pack and differential side gear (without the shim) on the gauge.
