Ranger 4WD V6-3.0L VIN V Flex Fuel (1999)
Flywheel: Service and Repair
Flywheel Dowels
Removal
1. NOTE: Take care not to damage the flywheel dowel holes or the surface areas around the flywheel dowel during removal.
Remove the flywheel dowels by using a drift pin where the flywheel dowel is installed in an open hole and a pair of locking pliers where the
flywheel dowel is installed in a blind hole.
Installation
1. NOTE: Care should be taken to drive the flywheel dowel squarely into place until it is fully seated and to not damage the surrounding surface
areas.
Install all flywheel dowels by driving them into place using a brass or plastic mallet.
