Ranger 4WD V6-3.0L VIN V Flex Fuel (1999)
1
Install TSS sensor wire into (16 pin) case connector.
2
Install TSS sensor wire into the locator.
4. CAUTION: Do not overstretch the retaining spring.
Install the transmission case (16 pin) electrical connector retaining spring.
5. Install the EPC and SSB solenoids.
6. CAUTION: The solenoid clamp must be installed in the TCC and EPC solenoid grooves, shift solenoid pockets and the No. 204 plug.
Install the solenoid clamp.
1
Position the solenoid clamp on the main control valve body.
2
Install the solenoid clamp screws.