Ranger 4WD V6-3.0L VIN V Flex Fuel (1999)
9. Remove the RH and LH mounting arm and pivot shafts through the RH access opening.
INSTALLATION
1. To install, reverse the removal procedure.
CAUTION: To avoid possible damage to the windshield wiper adapter and connecting arm clip, be sure the clip is fully seated before installing
the adapter and connecting the arm clip on the windshield wiper motor crank pin.
NOTE: Be sure to install the RH windshield wiper mounting arm and pivot shaft onto the windshield wiper motor crank pin until it snaps into
place.