Ranger 4WD V6-4.0L (2009)
20. NOTE: The camshaft timing slots are off center.
Position the camshaft timing slots below the centerline of the camshaft to correctly fit the Camshaft Holding Tool and the Adapter for 303-577 and
install the Camshaft Holding Tool and the Adapter for 303-577 on the rear of the LH cylinder head.
21. Remove the LH hydraulic timing chain tensioner.
-
Discard the washer.
22. Install the Timing Chain Tensioner.
23. Tighten the bolts.
1. Tighten the Camshaft Sprocket Holding Tool top 2 clamp bolts to 10 Nm (89 lb-in).
2. Tighten the LH camshaft bolt to 85 Nm (63 lb-ft).
24. Remove the Timing Chain Tensioner.