Ranger 4WD V6-4.0L (2009)
Air Bag Deactivation Indicator: Service and Repair
Passenger Air Bag Deactivation (PAD) Indicator
1. NOTE: Ignition must be OFF if disconnecting the Passenger Air Bag Deactivation (PAD) indicator electrical connector. Otherwise, a DTC will be
set in the Restraints Control Module (RCM) memory and must be cleared before releasing the vehicle.
Turn the ignition OFF and wait at least one minute.
2. Remove the 2 instrument panel center finish panel screws.
3. Pull out to detach the 4 retaining clips and partially remove the center trim panel.
4. Disconnect the PAD indicator electrical connector.
5. Remove the 2 screws and PAD indicator from the instrument panel center finish panel.
6. To install, reverse the removal procedure.
