Ranger 4WD V6-4.0L (2009)
6. NOTICE: All components must be free of dust, oil, fluid and foreign material prior to installation. A new seal kit must be used when
installing the anti-lock brake system (ABS) module. The old seals must be discarded as they may cause a leak between the ABS module
and the Hydraulic Control Unit (HCU).
NOTE: The new O-ring seals must be installed to the valve flange. Make sure the O-ring seals are not deformed when installed.
NOTE: Clean the groove of the ABS module before installing a new seal.
To install, reverse the removal procedure.