Ranger 4WD V6-4.0L (2009)
2. Connect the TCC solenoid electrical connector.
3. Connect the EPC solenoid electrical connector.
4. NOTICE: Excessive pressure may break the retaining pins.
Install the main control valve body wire loom.
-
Align the retaining pins to the holes in the solenoid clamps and gently press in the main control valve body wire loom guide and protector.
5. Install the transmission fluid pan and filter. For additional information, refer to Fluid Pan, Gasket and Filter See: Fluid Filter - A/T/Service and
Repair/Fluid Pan, Gasket and Filter.