Ranger 4WD V6-4.0L (2009)
![background image](/ford/ranger_4wd/v6-4.0l/Page-1163004.png)
5. NOTE: Inspect the driveshaft slip-yoke for wear and damage. Install a new component if required.
Align the driveshaft with the marks made during removal to make sure of correct balance.
6. With the marks aligned, install the rear driveshaft and bolts.
-
Tighten to 103 Nm (76 lb-ft).
7. Fill the transmission to the correct fluid level with transmission fluid and check for correct transmission operation.